How to use steam inhaler?

1- Place the unit on a rigid and flat surface with mask facing towards you.
2- Gently pull straight up on the cover of the inhaler to remove lid.
3- Remove the nozzle to the water heater tank by turning it Counter-clockwise.
4- Using the included measuring cup, fill the water heater tank with approximately 25ml of tap water. Do not overfill the water above the marker.
5- Reattach heater cover. Make sure it is tightly placed to avoid leakage of steam....
6- Replace top cover on main body. Make sure the suction tube is connected to the nozzle and inserted into the tank.
Note: Avoid bending the suction tube to allow smooth flow of water into the nozzle.
7- Place the mask on top cover.
8- Plug power cord into an appropriate electrical outlet for your model. Make sure the power switch on power cord is at “OFF” status before plugging.
9- Press on power switch to begin treatment. The lamp at the bottom of unit will be lit. After approx. 6-9 minutes, when the steam output becomes less and weaker, press power switch to shut off the unit.
10- Unplug the unit from electrical outlet.